BM2 series cycloid hydraulic motor (can interchange with OMR series)

Features

1. It adapts the gerolor design, which has a higher distribution accuracy.

2. Shaft seal is adapted, which can bear higher back pressure.

3. A variety of connection types of flange, output shaft and oil port.

4. Direction of shaft rotation and speed can be controlled easily and smoothly.

5. Small volume; compact structure.

Specifications

1. Intermittent means the entrance of the maximum pressure; continuous working pressure means the differential pressure.

2. Motor should not work under the highest pressure and the maximum speed.

3. The running time should not exceed 10% under intermittent working conditions.

4. The maximum working temperature is 80°.

5. The maximum allowable back pressure is 10MPa, but the recommended back pressure should not exceed 5MPa. A leaking pipe is needed when exceeding.

6. One hour running time under 40% of maximum working pressure is recommended before full capacity working.

7. Recommending N68anti-wear hydraulic oil, viscosity 37-73cSt, cleanliness ISO18/13.